I wanted to mount side floodlights on my 2001 jeep XJ, for offroading. But all the mounts I could find for them required a roof rack or drilling holes. So I made these for my side floodlights and used some 1/4 in x 1 in hex bolts from home depot. Other gutter mounts were for roof racks and are 50-120$ USD, and I would still have to bend and shorten them.

used:
lights; https://tinyurl.com/55snxu48
bolts; 1/4 x 1, (Homedepot letters ADC)
nuts; 1/4in, (Homedepot letters AAB)

feel free to remix it, if you have a cooler-looking one I would love to use it instead, I'm not very good at 3d modeling.

STL v6 has a better look
STL v5 has a hex head and a bottom hook
STL V4 has a circle head and no hook

No

standard