Siegward and Yhorm Cutscene Dark Souls 3 Boss Fight
Print Profile(2)
Description
Yhorm, old friend. I, Siegward of the Knights of Catarina, have come to uphold my promise!
Filament painting of the cutscene from the battle of Siegward of Catarina vs Yhorm the Giant. You're there too…
Art by Natty Dread on Flickr
This model includes multiple profiles:
- Thin version that's a bit floppy but prints quickly
- Thick version that's rigid enough to hang on its own
- Mini versions of both thick and think
- AMS and Non-AMS versions with pauses for filament changes
Make sure you choose the right plate for the print you want and use the filament change instructions that match your plate.
Thin version instructions
Print at 100% infill with a layer height of 0.06mm with a base layer of 0.16mm
The Model is 140.63x250mm in size
You may print at higher layer heights below the Min Depth of 0.58mm
The Max Depth is 2.4mm and the Actual Depth is 2.1mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Orange Transmission Distance: 5
PLA Gray Transmission Distance: 6
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #9 (0.64mm) swap to Orange
At layer #11 (0.76mm) swap to Gray
At layer #12 (0.82mm) swap to Orange
At layer #13 (0.88mm) swap to Jade White
At layer #14 (0.94mm) swap to Gray
At layer #20 (1.3mm) swap to Orange for the rest.
THICK version instructions:
Print at 100% infill with a layer height of 0.06mm with a base layer of 0.16mm
The Model is 140.63x250mm in size
You may print at higher layer heights below the Min Depth of 1mm
The Max Depth is 3.3mm and the Actual Depth is 3mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Orange Transmission Distance: 5
PLA Anycubic Gray Transmission Distance: 6
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #25 (1.6mm) swap to Orange
At layer #27 (1.72mm) swap to Gray
At layer #28 (1.78mm) swap to Orange
At layer #29 (1.84mm) swap to Jade White
At layer #30 (1.9mm) swap to Gray
At layer #37 (2.32mm) swap to Orange for the rest.
Boost Me (for free)
If you like this print, please consider boosting!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (2)