Search models, users, collections, and posts
Viking on horseback in the moonlight, hueforge
Print Profile(1)
0.08mm layer, 2 walls, 100% infill
Designer
3.3 h
1 plate
Open in Bambu Studio
Boost
14
36
1
0
12
8
Released
Description
Project: vikingo con mas capas de negro y azul claro.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 153.06x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm
Filaments Used:
PLA smartfil negro Transmission Distance: 0.4
PLA PLA Bambu Cian Transmission Distance: 4.9
PLA BambuLab Basic Beige Transmission Distance: 8
PLA smatfil White Transmission Distance: 6
This print uses 4 unique filaments
Swap Instructions:
Start with negro
At layer #12 (1.04mm) swap to Cian
At layer #15 (1.28mm) swap to Beige
At layer #20 (1.68mm) swap to White for the rest.
License
This user content is licensed under a
Creative Commons Attribution
Comment & Rating (1)