tentacles female dummy 13 heads 150% version 1.0

Thanks for reaching out!

Here we have a rule not to use a single Ai image. This means every image you see in posts or descriptions are real photos.

Another rule is not to upload designs that are not tested by us  first. So what you see is what you will print indeed.

Hope you like our work and maybe support us. Remember that you can support us for free just by like, follow, share and boost our work.

I finally decide to remix some female heads so to use them my dummies.

i decided to include them all in one model cause maybe in the future other heads will be needed.

There are separate profiles for each head.

I only print the 150% scale all the heads are 150% scale.

If you wish to print them on for the 100% version just scale them by 66,67%

what you can do for sure is to scale it by 66.67 and save the stl. then you can scale up this stl to whatever size you want.

The stl files for all of them are available also and they are 150% version.

All the female heads are on 150% scale also and are single color.

🙏 Please don't leave negative feedback if you don't doublecheck that you used your own well working filament profiles and be very sure that you build plate is well cleaned! 

The designs we upload are well tested so you don't have to worry about them. we never upload a design without fully tested them first!

🙏 Feel free to Follow, Boost, Like & Share this work — your support means the world and helps us bring more designs.

ways you can support our work:

• https://buymeacoffee.com/orama3dvibes

• Dont forget that you can support us for free just by following and sharing our facebook, instagram, patreon, youtube and makerworld accounts.