The Champ 2024
Print Profile(0)
Description
Project: Max 4 Time World Champion.hfp
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm
The Model is 160x200mm in size
You may print at higher layer heights below the Min Depth of 0.2mm
The Max Depth is 2.1mm and the Actual Depth is 2.2mm
Filaments Used:
PLA+ GST3D BLACK Transmission Distance: 0.7
PLA+ GST3D BLUE Transmission Distance: 4
PLA+ GST3D RED Transmission Distance: 6
PLA+ GST3D LIGHT PINK / SKIN Transmission Distance: 85
PLA+ GST3D WHITE Transmission Distance: 5
PLA+ GST3D Orange Transmission Distance: 10
This print uses 6 unique filaments
Swap Instructions:
Start with BLACK
At layer #3 (0.24mm) swap to BLUE
At layer #8 (0.44mm) swap to RED
At layer #19 (0.88mm) swap to LIGHT PINK / SKIN
At layer #30 (1.32mm) swap to WHITE
At layer #31 (1.36mm) swap to Orange
At layer #40 (1.72mm) swap to WHITE for the rest.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)