Nici Balikou Hueforge
Print Profile(1)
Description
You are see a picture of my sons best friend. Called “Papa Tigi”. It is the tiger Balikou from the company Nici.
Here are the projekt details.
Project: Pappa Tigi.hfp
Print at 100% infill with a layer height of 0.06mm with a base layer of 0.16mm
The Model is 150x200mm in size
You may print at higher layer heights below the Min Depth of 0.34mm
The Max Depth is 2.5mm and the Actual Depth is 1.2mm
Filaments Used:
PLA F4P black Transmission Distance: 0.1
PLA BambuLab Basic Jade White Transmission Distance: 5
PLA Generic braun Transmission Distance: 3
PLA BambuLab Basic Orange Transmission Distance: 4.8
This print uses 4 unique filaments
Swap Instructions:
Start with black
At layer #5 (0.4mm) swap to Jade White
At layer #7 (0.52mm) swap to braun
At layer #8 (0.58mm) swap to Orange
At layer #10 (0.7mm) swap to Jade White for the rest.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)