Panda (Black and White) - HueForge Print

This HueForge print was designed in collaboration with TheCraftyMaker, and is 100% compatible with TheCraftyMaker's shadow box frame, sized at 150mm x 210mm. The frame is not included in this print profile.

I have included a 3MF file for Bambu Lab printers and Bambu Studio users, as well as an STL for non-Bambu printers. The 3MF will have everything you need in terms of settings and filament swaps. If you are using the STL, the print instructions are below.

Print Instructions Print at 100% infill with a layer height of 0.04mm with a base layer of 0.2mm

Filaments Used:

• PLA Kingroon Black Transmission Distance: 0.4
• PLA+ eSun Grey Transmission Distance: 1.4
• PLA Overture Light Grey Transmission Distance: 1.6
• PLA Kingroon White Transmission Distance: 8

Swap Instructions:

• Start with Black
• At layer #18 (0.88mm) swap to Grey
• At layer #28 (1.28mm) swap to Light Grey
• At layer #36 (1.6mm) swap to White for the rest.

______________________________________________________________

If you like my models and would like to support my 3D printing endeavours, I now have a Patreon!

Subscribing to the $10AUD tier will grant you a commercial license to sell the physical prints of any of my models.

______________________________________________________________

If you like my work and would like to support me, you can now subscribe to a Thangs membership plan!, or if you prefer, my Patreon.

Joining will give you access to a private discord, all paid models, early access to some models as well as a commercial license to sell the physical prints of my models.