Christmas Fruit Cutting Tools

A few days ago, when cutting oranges, I found that it was easy to cut by hand when cutting them into small pieces, and the orange water flowed everywhere, and the cutting was uneven.

Therefore, a practical small tool for cutting oranges has been designed, which can evenly cut oranges and is not easy to hurt hands,

And there is also a water storage area at the bottom, which can collect the orange juice that flows out after cutting, making it convenient to use on dining tables, coffee tables, and even in offices and other places.

You can also use this tool to cut apples and other fruits of appropriate size.

It can meet the cutting needs of the vast majority of oranges and other fruits of various sizes：

The best fit is oranges with a size of 85mm or less, and around 90mm is also acceptable. You need to press down the orange slightly, and if it is too large, it is recommended to enlarge the model appropriately.

Hurry up and equip this practical little tool for the upcoming Christmas and daily life.

Instructions:

Place the orange on the orange cutting tool, then align the knife with the cutting groove and cut it from top to bottom.

Good for personal testing, welcome everyone to download. If you have any questions, please feel free to provide feedback in a timely manner. Thank you!!

More good things：

Dual headed shovel (original blade+replaceable print head) that can meet the full scene application of 3D printing and is friendly to hot beds. Welcome to download:

I have designed a self-locking phone holder, which is very practical, simple and beautiful. Welcome to download it:

自锁式手机支架 来自 JHY_makerMakerWorld：免费下载 3D 模型

A new portable travel soap box has been designed, which is simple, beautiful and practical. Welcome to download it:

便携式香皂盒 旅行香皂盒 来自 佳洋创客 - MakerWorld

In addition, a new hot bed shovel blade has been designed that can quickly replace the shovel head, is practical, and saves consumables. You can now achieve shovel freedom. Welcome to download it. The specific link and introduction are as follows:

热床刮刀—快速更换刀片 来自 佳洋创客 - MakerWorld

前两天切橙子时，发现切成小块时容易切手，而且橙子水流的到处都是，也切的不均匀。

因此，设计了一个切橙子的实用小工具，可以将橙子均匀切割，而且不易伤手，

而且底部还有盛水区，可以将切开流出的橙汁收集，方便在餐桌、茶几甚至是办公室等使用。

你也可以去切苹果等合适的水果，快去为圣诞节以及日常生活准备这个切水果的小工具吧！

使用说明：

将橙子放在切橙工具上，然后用刀对准切割槽，从上向下切割到底即可。

最佳适配85mm及以下的橙子，90mm左右的也可以，需要将橙子稍微用力按下去，太大的话建议将模型适当放大一下。

亲测好用，欢迎大家下载，有什么问题可及时反馈，谢谢！！