DJI Action Camera - Taysun Filter Box

This kit is designed for storing TELESIN DJI action camera filters—specifically, CPL, ND8, ND, and ND32 filters. The author uses this with an Action 4 camera, but the filters should also be compatible with, and thus storable in this kit for, the Action 5 Pro.

Below is a list of the materials required:

1. Upper box component.

2. Lower box component.

3. Two cuboid magnets, approximately 4.78mm per side; refer to the caliper reading in the image (5mm magnets are also suitable).

4. Two small hinge pins (the author utilized small screws from eyeglasses repair, approximately 1mm in diameter and 10mm in length; alternatives include small wire or toothpicks, serving as hinges to connect the upper and lower box sections).

The kit is suitable for TELESIN brand of DJI action camera filter storage, four filters for CPL,ND8,ND,ND32,the author's action camera for Action4.Its filters should also be compatible with the Action 5 Pro, ensuring universal storage compatibility.

Here is the list of materials used in this kit:
1.The upper box component.
2.The lower box component.
3.Two cuboid magnets, approximately 4.78mm per side; see the caliper reading in the image (5mm magnets are also suitable).
4.Two small hinge pins (the author used small screws from eyeglasses repair, approximately 1mm in diameter and 10mm in length; these can be replaced with small iron wire or toothpicks, functioning as hinges to connect the upper and lower box sections).