Solder fume extractor using 4028 fan - Free 3D Print Model

Search models, users, collections, and posts

archon

Tools>Hand Tools

IP Report

Print Profile(3)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 3 walls, 15% infill

Designer

2.7 h

2 plates

0.2mm layer, 3 walls, 15% infill

Designer

2.5 h

2 plates

0.2mm layer, 3 walls, 15% infill

Designer

2.5 h

2 plates

Open in Bambu Studio

Boost

Released

Description

This is a solder fume extractor using a 4028 fan. It has a filter room that can fill additional filters such as activated carbon or HEPA filter.

There are 3 variants of this extractor. If you want the fan speed to be controlled, you can choose the adjustable edition, which requires a PWM fan speed controller module. The module can be found here:

[4 global users] https://www.ebay.com/itm/225997484123

[4 china users] https://item.taobao.com/item.htm?id=780541282186

If you just want an ON/OFF control, you can choose the ON/OFF edition which requires a KCD-1-105 15mm round ON/OFF switch.

If you want it to be as simple as possible, the simple plug&play edition is for you. It needs only a DC-022B 5.5mm DC power jack which is easy to find too.

Here is the install instructions:

note: for ON/OFF and simple edition, installation steps are very simple, please refer to the instructions above, apologize for not offering the individual instruction.