LED Frame for Ikea Skadis Board - Light Effect - Free 3D Print Model

Search models, users, collections, and posts

Michele

Hobby & DIY>Other Hobby & DIY

IP Report

Print Profile(2)

All

X1 Carbon

P1S

P1P

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

A1 mini

Skadis 76x56

Designer

6.6 h

5 plates

4.9(34)

Skadis 56x56

Designer

5.9 h

5 plates

4.9(14)

Open in Bambu Studio

Boost

802

2508

824

404

Released

Bill of Materials

Maker's Supply Kits and Parts

Select all

WS2812B RGB LED Strip Light

Bambu Filaments

Select all

Onyx Black Sparkle (13101) / Filament with spool / 1kg

PLA Sparkle

Description

Membership

Love this model? With my Commercial License tier, you can legally sell 3D prints of it! Join now to unlock over 80 designs and boost your shop. Start selling today! 🚀

Join

Enhance your Ikea Skadis board with a touch of brilliance using this LED frame!

The design comes in two sizes — 76x56 and 56x56 — and is optimized for straightforward printing and assembly. For the 56x56 version, you’ll need two of each corner piece, plus four horizontal and four vertical segments. For the larger 76x56 version, simply add two additional middle horizontal pieces.

Secure the frame to your Skadis panel using 24 plugs designed for a snug fit.

Once assembled, attach your preferred LED strip along the inner edge of the frame. Dedicated slots at each corner ensure neat cable management for power connections.

I chose WS2812B LED strips for their stunning effects, but the design accommodates various options.

Mount the finished panel, switch on the lights, and enjoy a dazzling display that combines functionality with flair!

Comment & Rating (76)

@nedzalife

Boosted

Pinned by Designer

Print Profile

Skadis 56x56

Great idea and print! Turned out just as I was hoping it would. Thanks!

The profile uploader has replied

@michelem

wow wonderful!

@snake89

Boosted

Looks really great. DId you print the frame with translucent filament such that the light can shine through to outside?

@nedzalife

Boosted

Replying to @snake89 :

Thanks! Yes -ish. It was printed with Elegoo Clear PLA.

(Edited)

@Yiep

Boosted

Print Profile

Skadis 76x56

fits en looks great only had some warped prints due to being to low so upped bed to 70 and it printed great

The profile uploader has replied

@michelem

That looks awesome!

(Edited)

@Yiep

Boosted

Replying to @michelem :

thank you for the amazing design

(Edited)

@christian.zinke

Boosted

Great frame, it really solved my issues with the other variants that i had. I printed it with white PETG, but i will make another variant in clear PLA. Thank you so much!

@Techpulse

Boosted

Print Profile

Skadis 56x56

Absolutely TOP! It turned out great. Beautifully detailed work, you can't even see the screws on the wall through the Skadis anymore. Top!

Show original

@MidnightCreatio

I opted for printed Skadis walls, but only two diagonally opposite corners fit perfectly. Unfortunately, the other two corners don't fit due to the offset row of holes (see image). I noticed that the original Skadis walls have an odd number of hole rows, while the printed walls have an even number of hole rows. Would it be possible to make corners for an offset row of holes?

The designer has replied

Show original

@michelem

I'm sorry but this model fits only original Skadis and I can't know the exact measurements for a printed one which is not really compatible and there are so many each one could have different ones. What I would suggest is to glue them instead using holes.

@MidnightCreatio

This is not a problem. Then I'll get started and design suitable corners that fit into the design at my convenience 😁

Show original

@halessa

Boosted

Super, it looks simply great. I printed the frames in transparent PETG on my A1 mini and worked with COB LED strips. I cursed quite a bit because I have no idea about electrics, but in the end it worked. The lighting is integrated into Apple HomeKit and can be controlled via app or voice control

(Edited)

Show original

@puchaczeu

Print Profile

Skadis 56x56

Nice

@fonix232

Nice design, printing it right now. Small note, I noticed a potential mistake: all the side/corner elements have the horizontal and vertical parts (i.e. the frame and the connector ears) reinforced with a chamfer, but this is missing from the horizontal side pieces (Horizontal.stl).

The designer has replied

@michelem

Thank you a lot for feedback I forgot that! Going to update it ASAP.

@michelem

Fixed! Thanks again

@npoxy

Thanks a lot for sharing your design and idea. Super amazing. I used the 76x56 as they fit perfect over the middle.

@alvarosanchezx

Print Profile

Skadis 56x56

I only put LEDs at the top and on the left, but I think I need a brighter one

Show original

@BAZRA89

Amazing, I used these leds from amazon and it turned out great https://amzn.eu/d/h6fG8Dr

License

If you want to use this model commercially, please join my membership.

Join Now

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

IKEA Skadis

AU3D

82.7 k

18.7 k

IKEA Skadis Board - Light Weight

Takst3in

7.4 k

3.4 k

IKEA Skadis Hook

Many24

26.6 k

5.2 k

IKEA Skadis Board Connector

Marvin

3.2 k

1.3 k