1960's Tin Toy Robots

*This is my first project. I laid everything out on a plate in the project. I hope this makes it easier. 

Oh, and I added the rocket, spring and tread legs just in case someone wants them. 

Sorry if this was bit unorganized at first. This was a major update, let me know if anything is wonky.

I Love the 1960's Tin Toy Robots. This is my Replica Tin Robot Toy series. I tried to capture the look. 

The head and hips are one unit once glued and the body rotates around the "spine". Both arms raise and lower.

It should be pretty simple assemble. I decide to assemble them because support made the arm and body actions crunchy.

All of the parts are in the best print position to minimize and hide support rash. I used tree supports on all of them.

I use hot glue but E6000 or something similar should work.

I hope the printing goes well. I worked on them for quite some time.

Printing Details:

The tolerances are pretty close on the parts that move and they get tight when it is printed smaller.

The print profile I used was with tree supports, brims around the alignment pins. Prints are oriented how they should print.

I used PLA. 

Have fun printing!