Klaus inspired Santa sleigh - Free 3D Print Model

Search models, users, collections, and posts

drodfro

Household>Festivities

IP Report

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 2 walls, 15% infill

Designer

19.2 h

3 plates

5.0(13)

Open in Bambu Studio

Boost

283

644

438

115

Released

Description

This sleigh is inspired/based on the one used in the movie Klaus with some changes to make it more printable ready. AMS required (4 colors)

It requires assembly of the legs and runners since printing everything in one go would not be practical. The legs can fit in the sleigh without the need of glue (at least mine did. A1) and the black spirals point to the front and there is a proyection that should be touching (almost due to tolerances) the sleigh. Once the legs are assembled, place the runners on a flat surface standing up (the side in contact with the print bed is the outside) and glue the legs (and sleigh now since they are together) to the runners. Not recomended superglue here to give you some time for adjustments altough is fairly simple. I did one side at a time placing it over both runners in their correct placement to ensure is flat once glued.

Filaments used:

Sunlu PLA silk light gold.

Fillamentum PLA Vertigo Chocolate.

Smartmaterials3d PLA recycled brown and grenade

Comment & Rating (19)

@Alawa_Mob

Boosted

great model, changed the colours to suite what we had on hand but wouldn’t change a thing. the assembly instructions were helpful. boosted - merry Xmas!

The designer has replied

@drodfro

It's quite gorgeous actually. Now I'm hoping to see others deviate from my color choices like you did. Thanks and Merry Xmas to you too ;)

@user_2050355683

This printed awesome, sized to 160%. used gold, bronze, brown and matt red. Started the sleigh off with matt black and then changed it the bronze.

@fostersm18

Making these to give as Christmas presents to family. So cool!

@DanielCoelho

This sled is spectacular Thank you

Show original

@user_1015854698

how big is the sleigh

@Paulo_Silva

Print Profile

0.2mm layer, 2 walls, 15% infill

@user_1364520036

Print Profile

0.2mm layer, 2 walls, 15% infill

@user_1035283137

Print Profile

0.2mm layer, 2 walls, 15% infill

@Robsmith130

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

@user_2050355683

Print Profile

0.2mm layer, 2 walls, 15% infill

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.