SH02 Back Vent Heat Redirect and Blocker Plate
Print Profile(1)
Description
This solves the issue of the Sovol SH02 Filament Dryer blowing hot hot, hot air right into your precious filament and overheating said filament which could lead to brittle breakage.
Very quick print P1S does this in just under 1 hour.
Must print in temp resistant Filament, tests with ASA very good.
I've had the dryer going for 20+ hours at 70c with no issues.
P1S ASA profile, tuned Flashforge ASA in Black, 100c bed, 255c nozzle after full calibration.
As the heating element puts out temperatures higher than 70c to dry the filament I urge caution with filament choice. Testing went very well with ASA as it can take heat like a champ.
This is a modification and does not imply the manufacturer approves or that this will not void any warranties if any are provided by SOVOL. Using this print in your equipment is your sole responsibility in the event of any malfunction or damage that may occur. Be safe and happy printing!
Boost Me (for free)
Thank you very much for looking, and check back periodically for more random mess
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (34)