Print Profile(1)
Description
HueForge of an F-14A Tomcat, taken on a foggy morning aboard the USS Lexington Museum on the Bay. This particular airframe was used in the filming of the original Top Gun movie, and has been restored in screen accurate livery. The museum holds yearly movie nights as fund raisers that put this aircraft front and center for the public to see.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x150mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.9mm and the Actual Depth is 2.5mm
Filaments Used:
PLA BambuLab Matte Charcoal Black Transmission Distance: 0.3
PLA BambuLab Basic Brown Transmission Distance: 2
PLA BambuLab Basic Blue Gray Transmission Distance: 3
PLA BambuLab Basic Gray Transmission Distance: 2
PLA BambuLab Matte Ivory White Transmission Distance: 4
This print uses 5 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Brown
At layer #9 (0.8mm) swap to Blue Gray
At layer #13 (1.12mm) swap to Gray
At layer #17 (1.44mm) print will pause to allow you to swap the Ivory White into the Black slot.
At layer #18 (1.52mm) swap to Ivory White for the rest.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (1)