Bambu Lab Factory Hex Key Screwdriver Handle - Free 3D Print Model

Search models, users, collections, and posts

I'm Shu

Tools>Gadgets

IP Report

Print Profile(2)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer height, 3 walls, 15% infill Using PLA filament, hole compensation 0.14

Designer

1.2 h

1 plate

4.8(16)

0.2mm layer, 3 walls, 15% infill PETG filament

Designer

1.6 h

1 plate

4.7(3)

Open in Bambu Studio

Boost

199

119

Released

Description

Content has been automatically translated.

Show original

The L-shaped screwdriver included with Bambu Lab products isn't very convenient, so I've designed two models based on a straight-handled screwdriver, allowing for various combinations with the original.

The print orientation is vertical to enhance the surface finish. If you experience poor bed adhesion, consider rearranging the models on the build plate.

P1S inner hexagon

L-shaped hexagon

手柄

Allen Wrench Screwdriver

Comment & Rating (20)

@BuildByte3D

Print Profile

0.2mm layer height, 3 walls, 15% infill Using PLA filament, hole compensation 0.14

Very useful, printed without any adhesion issue. Thanks for sharing!

@user_3137305936

Print Profile

0.2mm layer height, 3 walls, 15% infill Using PLA filament, hole compensation 0.14

@PrintAtlas

will not fit newer hex keys from p2s, h2, ext. this is for the older printers that used smaller tools

@Fleabandit

Print Profile

0.2mm layer height, 3 walls, 15% infill Using PLA filament, hole compensation 0.14

works great. thank you

@user_1482397829

Print Profile

0.2mm layer height, 3 walls, 15% infill Using PLA filament, hole compensation 0.14

helping me a ton

@Shriker1

Boosted

Print Profile

0.2mm layer height, 3 walls, 15% infill Using PLA filament, hole compensation 0.14

Literal Life Saver!!!! Was running out of old star bit screwdrivers, but had all these Allen wrenches around, most useful 3d print I've done in a long time!!!!

@meltedface

Print Profile

0.2mm layer height, 3 walls, 15% infill Using PLA filament, hole compensation 0.14

Wiggles a LOT in the vertical position, because there is nothing to lock or block the shorter t bar in place. Was unable to use it.

@user_1586593121

Boosted

Print Profile

0.2mm layer, 3 walls, 15% infill PETG filament

very useful. Thanks

@AnchorsAway

Print Profile

0.2mm layer height, 3 walls, 15% infill Using PLA filament, hole compensation 0.14

worked great

@user_3353814039

Print Profile

0.2mm layer height, 3 walls, 15% infill Using PLA filament, hole compensation 0.14

For the 2.0 key 👍, however, the handle is a bit large for the 1.5

Show original

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Tool Holder (Square Hole)

一百

532

126

182

272