Quick release camera plate 1/4"

Search models, users, collections, and posts

TechBug

Education>Engineering

IP Report

GIF

Print Profile(3)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

0.2mm layer, 6 walls, 25% infill

Designer

1.2 h

1 plate

4.8(20)

P1/X1 QuickReleasePlate

1.1 h

1 plate

4.5(2)

Tilted bolts to avoid layer adhesion issues

17 min

1 plate

5.0(1)

Open in Bambu Studio

Boost

371

1068

454

267

Released

Description

UPDATE 01.12.2024
please download files again to make sure everything is correct

Please print screws in 0.16 layer if you printing them Separately
my print profile already takes this into account and they're already set up with 0.16 layer

If you find any problem with the print PLEASE let me know and I will try to fix it.

Thanks to : user_4100640359

for his 3d model:
https://makerworld.com/en/models/234977#profileId-418474

I thought it needed a little fix and it should go set of screw so here we GO!

Boost Me (for free)

If you appreciate my work or find this 3D model usefull please help me with Boost! :D

Comment & Rating (45)

@hank.shih

I printed a Pocket 3 holder but it had flaws I was pleasantly surprised to see your model so I combined the two and also modified the spring's thickness the result was very good I would like to publish this modification but unfortunately your requirements do not allow derivative works Could you allow me to upload the relevant files I will credit the original author

The designer has replied

Show original

@TechBug

Thats awesome work! I would like to grant you those permissions but ive submitted model to makerworld exclusive program and it automatcally sets permissions as you can see them now. Im unable to change it unfortunately.

@marco_rc_arena

That's my Pocket 3 cage and Capture clip

@hank.shih

Replying to @marco_rc_arena :

Yes, the cage and catcher clip are made using your model, but as I said, since your license does not allow derivative works, I will redesign the appearance and structure, and eventually I will include your model link and the parts combined by others, thank you

Show original

@mvdev

Print Profile

0.2mm layer, 6 walls, 25% infill

perfect and functional

@Jamesb3330

love the idea, and the main pieces, but I’m going to have to give up on it and look elsewhere for a solution, the screws have sheared off on me 4 different times, they can’t take more than about a pound of force in the wrong way or they break off.

@ThatHoodieGuy12

Boosted

you can buy some metal 1/4 inch screws on Amazon and other sites just make sure the existing ones havr the same length I had the same problem too I'm now using metal ones

(Edited)

@PrintCulinary

Print Profile

0.2mm layer, 6 walls, 25% infill

@ThatHoodieGuy12

Boosted

why does the camera plate have 2 holes instead of 1 centered

The designer has replied

@TechBug

for bigger cameras with lense etc it is better to put camera closer to one edge

@ThatHoodieGuy12

Boosted

Replying to @TechBug :

thanks

@glnnk.art

Printed this yesterday, and it's lovely. Can you share the STEP files with me? I'd love to adapt this to my synthesizer stand with a custom clamp.

@glnnk.art

(I won't be using any of the actual model parts due to the license, but I'd take the measurements to create a custom base and a custom QR insert, and will just link to this model for the actual parts)

@user_469906782

I have already printed several, it saved my life

Show original

@Jhox616

Can you explain what it is used for? I see that it slots and screws in place but what are each of the pieces connected to?

The designer has replied

@TechBug

It is mostly used for camera gear. Let say you have two tripods that you like to switch camera between them, instead of screwing it in back and forth you can use this Model and simply with one click detach camera from one tripod and atach it to your second tripod. You can use it for anything that has 1/4" screw mounting whole

@DimeRhyme

Hello, I'd like to modify this slightly to use for mounting specialized sensors. Could you provide the CAD files for the project? Thanks

The designer has replied

@TechBug

Hi Elliot, only thing i can do is share step files if it will be in any help for you?

(Edited)

@100luk

Boosted

This is the model I've been looking for It's been 5 months lol This is the best thing ever

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.