American Flag Horse Hueforge

Can be printed with a single AMS unit. Assign black and white to the same AMS slot and swap the black to the white after the black baselayer finishes.

Another cool patriotic print I decided to create in Hueforge. Enjoy!

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 240x160mm in size

You may print at higher layer heights below the Min Depth of 0.48mm

The Max Depth is 2.5mm and the Actual Depth is 2.6mm

Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA BambuLab Basic Red Transmission Distance: 4
PLA BambuLab Basic Jade White Transmission Distance: 5
PLA BambuLab Matte Light Brown Transmission Distance: 2
PLA BambuLab Basic Yellow Transmission Distance: 6
This print uses 5 unique filaments

Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Red
At layer #14 (1.2mm) swap to Jade White
At layer #16 (1.36mm) swap to Light Brown
At layer #18 (1.52mm) swap to Yellow
At layer #20 (1.68mm) swap to Jade White for the rest.