Mesh Christmas Tree LED Lamp

Commercial license available on Patreon

A beautiful LED lamp with a mesh Christmas tree frame, available in two sizes:

• Normal (Height: 18.5 cm with base, Compatible with all Bambu printers, including A1 Mini)
• Large (Height: 26 cm with base, Compatible with A1, P1, X1, …)

You can build it with the LED Lamp Kit 001 or Remote Controlled 16-color RGBW Puck Lights, links can be found below. I personally prefer the RGBW Pucks, because you can change the color, but the LED Lamp Kit is much more brighter - for the Kit you can consider printing the Shade in a color of your choice, while the Pucks work best with a white shade.

If you want the lamp to be as bright as possible, I included a option for thinner shades to be printed in vase mode (single line). Be aware they will be very weak and can easily break. Also the tips won't turn out perfect and might require some post processing. I recommend using the normal shades.

For assembly simply place the lamp in the base. First screw the shade on the base, then the cage. In the lamp, the pucks can only be turned on and off using the remote control.

If you want to use the Pucks with fast access, I included an open base, which can be simply placed on top of the light without disassembly.

Check out my Christmas Collection for more beautiful designs! https://makerworld.com/en/collections/2899118-christmas-decoration

Commercial license available on Patreon and MakerWorld!