Sonic Screwdriver Doctor Who, War Doctor John Hurt - Free 3D Print Model

Search models, users, collections, and posts

CvH

Props & Cosplays>Other Props & Cosplays

IP Report

Print Profile(2)

All

P1S

P1P

X1 Carbon

X1E

0.2mm layer, 2 walls, 15% infill

Designer

4.4 h

1 plate

5.0(5)

A1 0.2mm layer, 2 walls, 15% infill

3.2 h

1 plate

Open in Bambu Studio

Boost

114

Released

Description

This is my design of the sonic screwdriver from Sir John Hurt, also known as the war doctor

print all parts and glue together (tolerances will vary depending on your machine and material so some sanding may be needed)

the design is hollow so there might be enough room to include some electronics for light and sound

if adding light, it is recommended to print the top part in transparent material

Have some wibely wobely srewdriver fun

Boost Me (for free)

Love these designs? Let’s keep the filament flowing! 🧵✨ If my models have earned a spot on your build plate, please consider sending a Boost my way! 🚀 Every boost helps me prototype new ideas and keep sharing free designs with the community. No boosts left? No problem! 📸 Posting a photo of your print and leaving a rating is the best way to show others the model works great. Your feedback and "makes" are what keep this profile growing! 🛠️💙

Comment & Rating (11)

@jose.arroyo

This really turned out great! Since I am using my FlashForge Adventurer 5M, I downloaded the STL files. There was no spindle in the STL files but I downloaded the the 3mf file and was able to take the spindle from there. I used the spindle to attach the bottom two pieces. My paint scheme differed a bit from what you suggested but I am very happy with the outcome. Gorilla glue worked wonders in keeping everything together. Thanks for the fantastic work!

(Edited)

The designer has replied

@C.v.H.

Looks great ! sorry to hear i forgot to upload the spindle, but thanks for pointing that out to me so i have added it to the stl files for future downloaders 🤭 thanks for sharing your nice pictures !👍

@user_3712181566

the bottom don’t fit

The designer has replied

@C.v.H.

Sorry to hear your print did not fit, i printed mine with petg and it was a bit on the loose side so it needed some glue. I did mention in description that my experience is: tolerances can vary depending on machine or material so some need glue some need sanding. So i guess your setup is in the 'needs some sanding' category.