bobert

cover

20241031_105856.jpg

20241129_065541.jpg

20241129_063656.jpg

20241129_063712.jpg

57d81c4b-e48c-45bc-9a54-12055adedf37.jpg

plate_1.png

plate_2.png

plate_3.png

2024-11-28_2d484316f5114.jpg

.2mm Layer Height3 separate prints (1 per file):Main Body: use the "fill" setting to paint the faces white.&nbsp;Paint the top face of the inner channel black Only 2 color changesInserts: Make them white. &nbsp;Paint the BOTTOM face black. &nbsp;This is to provide maximum contrast and gives the best surface finish when you insert them later Only 1 color changeSolid color inserts: Self-explanatory. Might want to use a brim.&nbsp; 0 Color changesAssembly: Tolerances are such that you should be able to push all the pieces into place. Friction will keep them there. Give it an upside-down shake. If any come loose, use a tiny amount of glue to secure them&nbsp;&nbsp;

0.2mm layer, 2 walls, 15% infill

signal-2026-03-04-191953.jpeg

signal-2026-03-04-191953_002.jpeg

I like pushing the limits of the .6 nozzle, and frankly there aren&#39;t enough print profiles for the .6 nozzle.  So here&#39;s mine.  It could probably use some massaging, as the tiniest bits were a little hard to manage, and the fit was VERY tight, but she&#39;s pretty special.

0.6mm nozzle, 0.18mm layer, 2 walls, 15% infill

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

220x220x7mm&nbsp;3 Separate prints&nbsp;If the main body is not black, make sure the “hidden” surface in the channel is set to black, like in the print profile. &nbsp;NOTE: Multicolor printer not necessary, just makes it easier. Color changes are kept to a minimum. Wanted to make something a bit more complex than the gothic tracery or art deco geometric art that I&#39;ve made or seen around.Spent about 100 hours on this, making sure every little detail was perfect and fit with the rest of the piece.Use some mounting putty or double-sided tape to put it on your wall

Geometric Tracery Tile- Original Design #4

ASIA

Print Profile(2)

Description

Comment & Rating (14)

License

Related Models