Depths of Reflection - Bookmarks set of Two

If you want to sell prints of this model, as well as all of my models - future and past
Subscribe to My Patreon:

Or Subscribe for a commercial License Directly in Maker World:
 

Depths of Reflection 🌊✨. This set of two bookmarks captures the serene and introspective beauty of the sea. Each bookmark features a breathtaking sunset scene with gentle waves and silhouettes that invite you to pause and reflect. The vibrant shades of gold and pink blend with deep purples, creating an almost meditative atmosphere. Perfect for anyone who feels a deep connection to the ocean and its power to inspire calm and creativity. Let these bookmarks guide you through your favorite stories, offering a quiet moment of reflection with every turn of the page.

For best results use 0.2 nozzle if possible, but 0.4 is also works great (The pictures show a model printed with a 0.2 nozzle)
The design allows for printing with simple color changes at layer, which saves a lot of filament!

• NOW WITH 0.2 NOZZLE PROFILE READY FOR DOWNLOAD - USE FOR BEST RESULTS
   

USE A LIGHTER! - a quick pass with a torch on the printed parts will get rid of the inevitable stringing that comes with this type of models.
 

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA Jayo Black Transmission Distance: 0.3 / Amazon
PLA EryOne Matte Navy Blue Transmission Distance: 1.5 / Amazon
PLA BambuLab Basic Pink Transmission Distance: 6.4
PLA EryOne Mango Yellow Transmission Distance: 4.8 / Amazon
PLA 3D Jake Eco White Transmission Distance: 2.5

Color Pallete:

Swap Instructions:

Start with Black
At layer #9 (0.81mm) swap to NAVY BLUE
At layer #11 (0.97mm) swap to Basic Pink
At layer #17 (1.45mm) swap to Mango Yellow
At layer #18 (1.53mm) swap to White for the rest.
 

How to do more than 4 colors on a single AMS?

To use more than 4 colors with a single AMS is pretty simple when it comes to HueForges.

Always start the print from either Bambu Studio or Bambu Handy App - This will allow you to map the rolls of filaments to a certain slot in the AMS:

Now map the first 4 colors (which should already be inserted in the AMS to Slots 1 - 2 - 3 - 4
Once thats done move to maping colors 5 - 6 - 7 - 8 to respectively AMS Slots 1 - 2 - 3 - 4 again!

This will allow you to Change the rolls of filament once the printer is done with that color.
For example, in the picture above once we are done with the Black color (Which is usually first) we are going to remove the black roll (you can do that while printing) with White, then once Charcoal Black is done we are going to change that to Red, Dark Gray to Yellow and we are done. ~ You can do that with as many colors as you need!
YOU CAN PLACE A PAUSE ON THE LAST LAYER OF COLOR 4 TO AVOID HAVING TO BABYSIT THE PRINTER. ONCE PAUSED CHANGE 1-2-3 WITH 5-6-7 AND RESUME. IF YOU NEED MULTIPLE PAUSES YOU CAN DO THAT TOO

Drop me a follow!🤜🤛