Starship HLS
Print Profile(4)
Description
English: This is a speculated Starship HLS (Human Landing System) model. I mainly referenced images of the latest drawings from the SpaceX website and made modifications for better 3D printability. If you print it using my print profiles, the model is about 25.5 to 26.5 cm (~10 to 10.4 in) tall and takes as little as 4.5 hours to print (Regular No AMS). It is compatible with my Super Heavy booster model and OLM model that I released earlier. Glue is needed during assembly. Please make sure you test-fit all the parts before you apply any glue. You can sand the edges of some parts down, if the added tolerance is not sufficient for your machines.
This is a speculated Starship HLS (Human Landing System) model. I mainly referenced images of the latest drawings from the SpaceX website and made modifications for better 3D printability. If you print it using my print profiles, the model is about 25.5 to 26.5 cm tall and takes as little as 4.5 hours to print (Regular printing, no AMS). This model is perfectly compatible with my Super Heavy booster model and OLM model. Glue is needed during assembly. Please make sure you test-fit all the parts before you apply any glue. You can sand the edges of some parts down beforehand for a cleaner bond
There are 2 editions: regular edition and exploratory edition.
The regular edition has no interior structures but has 3 different configurations. Changing the configuration is very simple.
1) Solar panels are hidden during take-off
2) Solar panels placed vertically: simulate when sunlight is perpendicular to the Starship
3) Solar panels placed horizontally: simulate when sunlight is parallel to the Starship
This model has two editions: regular edition and exploratory edition. The regular edition has no interior structures but can be assembled into 3 different configurations of the Starship. Changing the configuration is also quite simple. 1) Solar panels retracted inside the cabin: simulating the state during launch 2) Solar panels placed vertically: simulating when sunlight is perpendicular to the fuselage 3) Solar panels placed horizontally: simulating when sunlight is parallel to the fuselage
English: The exploratory edition has some interior structures implemented. The interiors are based on very limited resources online and a group of rocket fans of mine's speculation. We had a few nice debates, such as on the number of solar panels the Starship HLS will carry and its window arrangements, before settling down to the current design. One of my friends who works at SpaceX told me that SpaceX may not have any plan on how the interiors will look yet, so please treat this model as a casual model instead of an accurate model.
The exploratory edition contains some interior structures. These interior designs are based on very limited online resources, as well as speculations from me and a group of rocket enthusiasts. We had several interesting discussions, such as on the number of solar panels the Starship HLS will carry and the layout of the windows, ultimately settling on the current plan. A friend who works at SpaceX told me that SpaceX may not have any specific plans for the interior structure yet, so please treat this model as a casual model rather than a simulation model
I uploaded 4 print profiles. Please thoroughly clean your build plate before printing, as some parts have a small bottom layer.
1）Regular Edition AMS: No interior + colored solar panels & nameplate
2）Regular Edition No AMS: No interior + uncolored solar panels & nameplate
3）Exploratory Edition AMS: Colored interiors + colored nameplate
4）Exploratory Edition No AMS: Uncolored interiors + uncolored nameplate
I uploaded 4 print profiles. Please thoroughly clean the build plate before printing, otherwise small parts with a small first layer area might tip over. 1) Regular Edition AMS: No interior + multi-color nameplate 2) Regular Edition No AMS: No interior + single-color nameplate 3) Exploratory Edition AMS: With interior + multi-color Starlink model + multi-color nameplate 4) Exploratory Edition No AMS: With interior + single-color Starlink model + single-color nameplate
English: We (a group of rocket fans and I) hope you will enjoy this model. It took us a lot of time to do research and design.
My rocket enthusiast friends and I hope everyone will like this model. This thing took us a long time to research and design
Boost Me (for free)
If you enjoy this kind of complex model, please consider giving me a boost! Creating detailed models like this takes a lot of time and effort, and your encouragement will help keep me motivated to keep going. Thank you!
If you want to see more high-quality rocket models, please give a boost. This will motivate me to keep creating models. Thank you!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (113)