Fallout-NukaCola v2 blue jumpsuit (HueForge)

Having read in my comments that it looks better in a blue jumpsuit, I took this as inspiration and remade it.

Project: Fallout-NukaCola v2 blue jumpsuit.hfp
Print at 100% infill with a 0.08mm layer height and a 0.16mm base layer

The model measures 165x250mm
Higher layer heights below the minimum depth of 0.48mm are permissible
The maximum depth is 3mm and the actual depth is 2.4mm

Filaments Used:
Bambu Lab PLA Basic Black Transmission Distance: 0.6
Bambu Lab PLA Basic Red Transmission Distance: 4
Bambu Lab PLA Matte Ice Blue Transmission Distance: 3.5
Bambu Lab PLA Basic Yellow Transmission Distance: 6
Bambu Lab PLA Matte Ivory White Transmission Distance: 3.5

This print utilizes five distinct filaments

Filament Swap Instructions:
Begin with Black
At layer #9 (0.8mm) switch to Red
At layer #15 (1.28mm) switch to Ice Blue
At layer #20 (1.68mm) switch to Yellow
At layer #24 (2mm) switch to Ivory White for the remainder.

Remember, if scaling is desired, modify only the x and y axes; the z-axis must remain unchanged.