Dark Souls Style Castle

Dark Souls Style Castle (First and Second Floors)

Project Introduction:

This reference image is from a Xiaohongshu network AI generation, comprising four floors in total This work incorporates the architectural design of Dark Souls Due to time constraints and skill limitations, the author has presently only crafted the initial two floors, and some details cannot be perfectly replicated (primarily due to a shortage of 3D printing filaments) This model is a gift to all Dark Souls aficionados and large model enthusiasts

This reference image is generated by the network AI of Xiaohongshu, with a total of 4 layers. This work combines the architectural design of Dark Souls. Due to time and skill limitations, the author has only produced the first two layers temporarily, and some details cannot be fully restored (mainly due to the lack of 3D printing consumables). This model is given to all players who love Dark Souls and enthusiasts of large models.

Printing Details:

1 For printing, please prepare tools (pliers for support removal, or similar tools; glue or a lighter will suffice)

2 Ample patience

3 PETG is not recommended due to extensive support; exercise caution during disassembly

4 Downscaling is not advised

1. Please prepare tools for printing (pliers for removing supports, other similar tools are also acceptable; glue or lighters are only needed)

2. Sufficient patience

3. It is not recommended to use PETG due to its extensive support structure. Please handle with care during disassembly.

4. It is not recommended to scale down the model.

Lighting Details

The lighting utilizes magnetron lamps; we recommend approximately seventeen Tuozhu KC001 warm lights for optimal effect, though fewer will also suffice

Affix the lights within the model; employ magnets for the switch, drawing near to activate, and again to deactivate

The image indicates suitable light placement

The lighting uses magnetron lamps, and it is recommended to use around 17 full configuration KC001 warm lights from Tuozhu,

Stick the lights inside the model, use magnets for the switch, approach the lights to turn them on, and approach the lights to turn them off again

The picture shows the location where the light can be installed

Assembly Video, https://www.xiaohongshu.com/explore/675aa5c60000000002035eb2?note_flow_source=wechat&xsec_token=CBKfvIHwk6RNc4PfKL1KaaDD3eQPmRiWnnMNqo3o3sOyw=

Filaments: All Tuozhu

Assembly Guide

1 Please consult the uploaded files

2 Given the model's size, prepare two spools of filament

3 Due to variations in filament and printer age, some details or clasps may require sanding

4 The upper section, or first layer only, requires approximately 300g of filament

Please refer to the uploaded file

Please prepare two rolls of materials for the two large models

Due to different consumables and printer age, some details or buckles need to be polished.

You can only print the first layer, which is the upper end of the model, using approximately 300g of consumables

Detailing

Various interior architectural details such as tables and torches have been included and enlarged for enhanced aesthetic appeal

Schematic and Reference Image of the Complete Structure