X1C/P1S Poop Chute (To Bucket)
Print Profile(3)
Description
ALL FACTORY HARDWARE!!!!
The Cobalt Chute provides a perfect solution for those of you looking for the largest possible poop storage! I've tried the most popular Chute buckets available for Bambu's enclosed printers, but I always run into a problem; STORAGE! Countless times I've come home to a poop shut clogged up from getting full (constipated, if you will). This not only can cause your print to fail, but most likely will damage your printer!!!
I've created a Chute designed to drop down into a storage container of any size you need!! This print works perfectly if your printers are stationed on pallet racking or any elevated surface with hollow space behind and underneath!
This print is all slide into place and very secure! To mount it, simply remove the factory screws located on the back side of the existing Chute. Then, align the Cobalt Chute with the holes. Next, screw in the printers shipping screws until firm. Finally, slot in the desired length of Chute and your done!!
NOTE: If you need the chute to point the opposite direction, simply mirror the chute turn on its long axis (Y axis).
NOTE: If you currently have AMS Cable manager made by @Darren.meier , you will need to modify it, remove it, or print the modified version I have created for you to use! This version simply removed the 90 degree corner on the right hand side, allowing for more room for the Cobalt Shute
Original: https://makerworld.com/en/models/209340#profileId-229270
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (561)