Bowling Pin Stand w/Options

Here I've created a bowling ball display stand for my local alley's pro shop. He has a couple pins that were signed by famous bowlers he wants to display.

You'll notice there is a dimple in the bottom of the model. That's for a drill bit to center on if you want to drill a pilot hole and use some kind of flathead screw to secure the bowling pin. Could also be used for glue or tape. It sits nicely in there as is but just thought I'd put in as an added feature.

In the .3mf file I've included 3 options to print for your desire. All of them use 10% Cross Hatch infill, Sunlu High Speed PLA, 0.2mm layer height standard bambu profile. Print times are estimated on my a1 mini.

1. No text, just a square. 2h 20 min, 79 grams
2. Ready for text. If you like, you can use the solidworks part to add or modify the text I have in there. Or if you're more comfortable using a different program or even bambu studio feel free to do that as well. Print time is 2h 41m, 99 grams
3. Here's the example I made for my pro, in case you also are a fan of these bowlers. Text came from Solidworks and was nice and organized

If you read this far and you like what you see, I'd love a boost! They're free, just like this model :)