Christmas Chandelier LED Tea Lights 100% Printable
Print Profile(1)
Bill of Materials
Description
Heyhoooo
Here I have a Christmas Chandelier that can hold 4 x LED Tealights.
I designed it to be 100% printable and no other hardware parts than the lights are required.
The Holder for the lights have a diameter of about 38 mm and a height of around 20 mm.
If you only have access to LED- Lights with other dimensions feel free to comment/ contact me so I can adapt the design for other sizes too.
I already testprinted all critical parts and made sure that the Design will fit together nicely! (Printed on A1, X1C & Prusa XL)
U can decore it with some greens!
If you like my design feel free to…
Boost Me (for free)
Thx a lot!
Printing Instructions:
I printed all parts with PLA ,4 mm Nozzle ,2 mm layer height.
Don't overtighten the threads. Since this Design has no technical requirements I did not design it to withstand an hurricane ,-)
If you are goin to use real candles I would highly recommend to use a metall/ glas container around them and print the Arms + Candleholder in PETG. This design is made with LED Lights in mind.
Snap into place and threaded components.
Sorted .3MF file with the option to print the parts with single colors or in multicolor.
Have fun!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (9)