Cowboy Pedski

cover

IMG_6046.gif

IMG_6042.JPG

IMG_6043.JPG

IMG_6044.JPG

plate_1.png

plate_2.png

2024-11-26_233d8495c467f.jpg

2 Plates, Second plate is Multicolour AMSSupport on the Knob piece only

0.2mm layer, 2 walls, 15% infill

IMG_6197.JPG

After some feedback I&#39;ve added knurling to the knob so you can turn it easier.

UPDATED design with Knurled Knob

Knurled knob only

23eightfive

IMG_1610.jpg

0.2mm layer2 walls15% infill&nbsp;Three magnets 8x3

35 degree angle bracket

Lunchbox

DishesNoAMS.jpg

Print Plate #2 first with white filament (Clean/Dirty Sign)Print pauses on layer 8, swap to black filament and finish the rest of the print.&nbsp;When printing Plate#1 the pring pauses on layer 24 to allow you to drop in magnets.

0.2mm layer, 2 walls, 15% infill - No AMS 

Knob

Ethan D

20260207_120421.jpg

20260207_120058.jpg

20260207_120317.jpg

Much larger knob for dishwasher sign. This is an assembly of 3 parts. &nbsp;Instructions:<ul><li>Fold the pin in half</li><li>Push folded pin through the cam&#39;s center hole. Pin&#39;s tip must protruding from hexagon side. See photo.</li><li>Optional: Apply glue to knob hex pocket and pin hole. </li><li>Place cam and pin on inside of dishwasher sign faceplate so the pin is facing out</li><li>Capture faceplate between knob and cam<ul><li>Insert pin into knob</li><li>Align knob with dishwasher sign faceplate knob hole</li><li>Align male and female hex of cam and knob respectively so knob sits flush on cam.</li><li>There may be a click.</li></ul></li><li>Ensure pin is below flush of cam&#39;s underside surface. <ul><li>The pin must be as deep as possible to capture knob.</li><li>Knob is now secure. </li></ul></li><li>Continue with assembly of dishwasher sign.</li></ul>

Ergonomic Knob Assembly

https://www.printables.com/model/19015-dishwasher-cleandirty-sign

<h3>***UPDATE***</h3>After some feedback I&#39;ve uploaded a print profile with knurling on the knob/dial so you can turn it easier.&nbsp;&nbsp;Magnetic Dishwasher sign. Turn the knob to change the sign and let everyone in the house know if the dishwasher has clean, or dirty dishes in it.&nbsp;No glue needed, friction fit should work fine. If it does not, a little bit of superglue will hold the top and bottom plates together.&nbsp;You will need two 8mm x 3mm magnets. There is a pause in the print to embed the magnets. Once the print pauses, place the magnets in the holes then resume the print to allow 2 layers of filament to hold the magnets in place.

Dishwasher sign - Clean / Dirty

fulford.damien2

PXL_20250530_191810933.jpg

PXL_20250530_192030123.jpg

PXL_20250530_192141334.jpg

PXL_20250530_191902767.jpg

Dishwasher Sign - 30 Degree Magnetic Mount

abra5umente

PXL_20250515_060635229.MP.jpg

Dishwasher sign - Clean / Dirty + 45 Degree Mount

ASIA

Print Profile(6)

Bill of Materials

Description

UPDATE

Comment & Rating (333)

This remix is based on

License

Remixes (5)

Related Models