twinkly christmas light grid

I made these grids specifically for use with twinkly strings 100ct 4mm Christmas lights. There are 4 different parts all on seperat print plates included. 1st is the actual grids. 1 grid will hold 12 lights. 2nd is the clips. The clips are used to hold the grids together and they double as hangers. 3rd is a partial grid. Since i made these to be used with my 100ct Twinkly strings, 8 plates and 1 partial plate make 101 holes. I just skip the bottom center hole and they look amazing. And the 4th is just a finished top piece to attach a clip at the top. You can set the infill to whatever you like. I have it setup to hexagon in the profile. I tried a few different ones and they all look really cool. The lights show the infill. This is only the 3rd thing I've made and i hope it prints well for everyone. Again i just want to say these are made for Twinkly strings. The leds on them are 4mm. other lights may not work. If you have any questions, please reach out and I will try and help anyway i can. I just really wanted to share this because they turned out so cool for me. Thanks