English: This is an extruder for the CL-260 / Ultimaker 2. It is printable, installable, and functional. Plain bearings are not required, but you can shorten and install these plain bearings http://r.ebay.com/mupM7q. The included plain bearing files are for 6mm rods. With the above-mentioned plain bearings, you can also use 8mm rods.
I designed this head because I had my CL-260 game in mind. I then drew this head, built it in, and now it runs more smoothly, and it no longer has any play.

German: This is an extruder for the CL-260 / Ultimaker 2. You can print it, install it, and it works. No plain bearings are required; however, you can shorten and install these plain bearings http://r.ebay.com/mupM7q. The enclosed plain bearing files are for 6mm rods. With the above-mentioned plain bearings, you can also use 8mm rods.
I designed this head because I had my CL-260 game in mind. Then I drew this head and built it in, and now it runs more smoothly and has no play whatsoever.