Search models, users, collections, and posts
Rocket (C6-P Motor)
IP Report
Print Profile(1)
0.2mm layer, 2 walls, 25% infill
Designer
2.2 h
1 plate
Open in Bambu Studio
Boost
15
23
0
1
30
15
Released
Description
Printable Flying Rocket
- Flies up to 300m with the C6-P motor.
- A steel rod weighing approximately 25g should be added to the tip to ensure straight flight.
- Use the screw ring to securely hold the rocket motor inside the body.
- For launching, use a rod with a 3mm diameter and a minimum length of 40cm.
This 3D model file for a flying rocket is provided "as-is" without any guarantees or warranties of any kind. By using this file, you acknowledge and agree that:
- I assume no responsibility or liability for any damages, injuries, or losses that may occur from the use, assembly, or operation of this rocket.
- Building and flying rockets involves inherent risks, and caution must be exercised at all times.
- Ensure compliance with all applicable safety guidelines, laws, and regulations in your area.
- Use at your own risk and discretion.
By downloading or using this file, you accept full responsibility for any outcomes resulting from its use. Always prioritize safety.
License
This user content is licensed under a Standard Digital File License.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)