Mechanical Dragonfly (assembly model, only 17g filament, 1 hour print)

This is a kit card that can be assembled into a mechanical dragonfly. It only requires 17g of filament and 1 hour of printing time.

Compared to the original author's model, the following changes have been made:

1. Thickness reduced to 1mm, ensuring sturdiness while shortening printing time.
2. All connections have been removed, reducing flaws in the assembled model.
3. Each part is a separate entity, making it convenient for users to color individually (splitting entities allows for individual coloring or printing).
4. The size is suitable for use as an ornament, and printing does not require multiple plates.
5. This kit card is a rebuilt 3D model to ensure that all parts are separate entities.

Instructions for use:

• Although it's called a kit card, the parts are not connected, so be careful not to lose small parts after printing.
• Assembly is somewhat challenging, but it's also fun to assemble it step by step following the cover image.
• Rich in detail, dynamic in appearance.
• Gaps are properly adjusted, assembly does not require glue and parts will not fall off.
• You can also split it for multicolor printing for even better results.
• The model stands stably, making it a great ornament.

Hope you or your children will like this model!