Search models, users, collections, and posts
Print Profile(1)
0.08mm layer, 1 walls, 100% infill
Designer
53 min
1 plate
Open in Bambu Studio
Boost
262
560
4
3
252
18
Released
Description
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 55x55mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used:
PLA BambuLab Matte Charcoal Transmission Distance: 0.6
PLA+ Sunlu Red Transmission Distance: 6
PLA BambuLab Matte Marine Blue Transmission Distance: 0.5
PLA BambuLab Matte Ivory White Transmission Distance: 3.5
This print uses 4 unique filaments
Swap Instructions:
Start with Charcoal
At layer #9 (0.8mm) swap to Red
At layer #13 (1.12mm) swap to Marine Blue
At layer #17 (1.44mm) swap to Ivory White for the rest.
License
This user content is licensed under a
Creative Commons Public Domain
Comment & Rating (4)