AMS Lite Top Mount Damper TPU Upgrade

I was not happy with Bambu's damper on their AMS Lite Top Mount. It was not very solid, so I designed my own version. It works with the already printed Bambu Lab Top Mounted AMS Lite stiffener. Just remove to stock round PLA dampeners and pop in the Upgraded TPU one. The top mount and stiffeners are not included and must be downloaded separately and can be FOUND HERE.

***IMPORTANT*** : This model is designed to be printed with TPU. I HIGHLY recommend using TPU settings that you are comfortable using. I found that for the best results, print SLOW and to print by object (i.e. one at a time)

Required:

This model replaces Bambu's original damper only. If you havn't already, you will need to download Bambu Lab's official AMS Light Top Mount which can be found here: https://makerworld.com/en/models/92486?from=search#profileId-100105

Print Settings:

• Bambu Lab TPU 95A HF ( found here )
• 0.20mm Layer Height
• 4 Walls
• 15% Gyroid Infill
• Use glue on the build plate! Not as an adhesive, but as a releasing agent. 

Install:

I uploaded a simple GIF to show how to install, found below.

Are you having fitment issues with your spools on the AMS Lite? Check out my AMS Lite Spool Adapter! https://makerworld.com/en/models/768730?replyId=32079948&replyType=2#profileId-704226