Snark Tuner Replacement Stem
Print Profile(0)
Description
After multiple Snark tuner stems broke I just decided to print my own. These work great but may be a bit looser than your liking. I would try the size first but if you want it tighter, printing at 101% or even 102% should still work.
I just printed PLA a 0.1 layer height and 100% fill. They work great.
I would suggest using the short "strongest" one unless you use a stronger filament or are ok replacing it once in a while.
If you have a part of an old stem still inside, I drilled a small hole and then used a metal rod to pop it out.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)