Print Profile(1)
Description
Hey there,
Another day, another model! This time I created a tablet / notebook / e-reader / Remarkable stand for on my desk that can be adjusted in angle and in height!!! Assembly is really easy and quickly done. Just make sure you are there when printing plate number 2! I added a pause to the knobs as 3 nuts need to be pushed in the holes. After you have done that just resume the print. As not all nuts are exactly the same height check that the nut does not stick out above the already printed knob before resuming! I also added caps for covering the hex bolt head.
Parts you will need are:
2pcs. M8x40 bolt
1pcs. M8x20 bolt
3pcs. M8 nut
Check out the list below for the beautiful Metal PLA I used!
Thanks for your support and don't forget to give me a boost when you can!
Boost Me (for free)
A boost is very welcome, its free for you to give and a big compliment for me to receive one (or two)!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (19)