Search models, users, collections, and posts
Bloodsport Hueforge
IP Report
Print Profile(1)
0.08mm layer, 2 walls, 100% infill
Designer
9.5 h
1 plate
Open in Bambu Studio
Boost
42
95
6
2
35
26
Released
Description
Boost Me (for free)
Project: Bloodsport.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 174.32x240mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
Filaments Used:
PLA Anycubic Basic Black Transmission Distance: 0.4
PLA BambuLab Basic Red Transmission Distance: 4.1
PLA BambuLab Basic Yellow Transmission Distance: 5.5
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Red
At layer #19 (1.6mm) swap to Yellow
Border Only Colors from here until the end.
At layer #23 (1.92mm) swap to Jade White
At layer #29 (2.4mm) swap to Yellow for the rest.
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial
Comment & Rating (6)