SebArt Mini Avanti S Wheel Wells
Print Profile(0)
Description
Summary
Wheel wells for the SebArt Mini Avanti S.
Reliably prevents sand dirt etc from being sucked up by the EDF or the turbine.
Print in PET for added strength and glue in with CA/Epoxy.
Might require some trimming of the intake ducting which in some planes extends a bit beyond the wood former to which it is glued.
2 versions included. One with a slightly thicker wall for added strength (not really required though) and a lighter, thinner version (recommended)
Print Settings
Printer Brand:
TEVO
Printer:
Delta (Little Monster)
Rafts:
No
Supports:
Yes
Resolution:
0.16
Infill:
5%
Filament: any PETG
White
Notes:
Any PETG or PLA will work for this.
License
Comment & Rating (0)