Print Profile(1)
Description
2U 10 Inch Hue Bridge Hub Rack Mount that actually still allows you to press the button to pair devices, if you don't mind losing 1U of space!
The bridge can be in any orientation, although if you want the cables exiting below (so the logo is up the correct way) then you will need clearance, the pictured image has the cables exiting on the right.
The clip STL provided slides in to the hole on the back of the hub, however you may find it's not required, the Hue Hub Rackmount will require one for each side.
You will need heat set inserts and M3x8 bolts, slightly longer bolts are likely to be fine.
M3 4.6mm diameter heat set inserts: https://www.amazon.co.uk/gp/product/B095VW7GBW/?th=1
Note there are 4 versions of the main plate as described in the last image.
My other 10 inch models here: https://makerworld.com/@n3rding/collections/3262188
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (14)