Globe Lithophane Lamps (Moon and Mars)
Print Profile(1)
Bill of Materials
Description
Earth can be found here
This project was inspired by @Topik work.
Globes were created using 3dSolarLithophane from GitHub and itsLitho.
The idea was to create a compatible lamp with Bambu Led kit 001 but at same time show a glow. Also important feature is they rotate.
Globes are 140mm diameter and take around 5 to 7 hours to print. Moon is the longest.
Everything was printed on a A1 Mini.
Print profiles don't work because of MakerWorld slicing limitations. Each globe can take up to 30 minutes to slice depending on your CPU.
Moon took me more than 20 minutes on a i9 ultra.
Settings for globes:
0% infill
2 walls
Layer height 2.0
Wall generator Arachne
Supports: yes (tree, critical only)
Settings for Globe Fit (Lamp Holder):
15% infill
3 walls
Layer height 2.0
Wall generator Arachne
Colours:
Its really up to you. I provided a diffusor you can use. Mars colour is a Rusty Red, but it takes a bit of the light.
I strongly recommend using CMYK Lithophane filament. I used eSun PLA+
Also looks great in Glow in the dark translucent Filament.
Compatible with Bambu led kit 001 that now you can buy on AliExpress for a fraction of the price
Assembly:
- Insert lamp inside lamp holder
- Insert globe in lamp holder. Should fit nicely. Use Vaseline to improve rotation
To remove parts i used the Bambu scrapper.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (5)