Doorbird Wedge Angle Bracket - D101 / D101S
Print Profile(1)
Description
This is a Doorbird wedge angle mount for the D101/S model.
You'll need 4 M3 hex head screws (8mm) to mount the Doorbird mount or you could try 4 small Philips Head screws. You should probably use pan head screws to attach the mount to your house as I made the bottom of the holes flat.
I've also included a Hole Stencil so you can plan out where you need to drill into your wall, Just print it with no bottom or top layers and 20% of the fill of your choice to save time on the print and give you better visibility.
There are both LHS and RHS models, they are labelled. Neither of the designs are compatible with each other so make sure you print the correct version.
I've also designed a version with a hood, it should be attached with a M3 hex head screw (8-12mm). if you intend to use a hood right away or in the future make sure you print the wedge which accepts the hood as it has the hole for the screw.
There is also a standalone hood which can be attached to the doorbird with double sided adhesive tape.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (1)