Mamamoo Box Logo Keychain - No AMS needed! - Free 3D Print Model

Search models, users, collections, and posts

PDXDarby

Generative 3D Model>Image to Keychain

IP Report

This model is created by Image to Keychain

Make Your Model

Print Profile(1)

All

0.16mm layer, 3 walls, 30% infill

Designer

39 min

1 plate

5.0(2)

Open in Bambu Studio

Boost

Released

Description

For my MooMoos!

I made this keychain for my fiancée, who loves Mamamoo. This is the first 3D print model that I've ever made, but I look forward to making many more!

I chose to print this keychain in four parts instead of one solid print for two reasons:
1. It allows multicolor printing without AMS.

2. It takes half of the time to print with half the cost. There was a lot of projected filament waste (and 24 filimant color changes!!!) with the single object print.

The pieces should fit snug together with no need for sanding or glue. I pushed the pieces in with a flat surface to secure them.

If I can figure it out, I'll also post a single object version for those with AMS and/or not wanting to piece it together.

Please let me know if you have any problems or have suggestions and I'd be glad to work on those!

Comment & Rating (2)

@xpaidamen

Print Profile

0.16mm layer, 3 walls, 30% infill

@user_3310882723

Print Profile

0.16mm layer, 3 walls, 30% infill

No more

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.