Search models, users, collections, and posts
Léon Hueforge, Jean Reno
IP Report
Print Profile(1)
0.08mm layer, 2 walls, 100% infill
Designer
4.6 h
1 plate
Open in Bambu Studio
Boost
49
99
12
10
67
34
Released
Description
Boost Me (for free)
Project: Leon.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 240x193.61mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Gray Transmission Distance: 3
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 3 unique filaments
Swap Instructions:
Start with Black
At layer #18 (1.52mm) swap to Gray
Border Only Colors from here until the end.
At layer #23 (1.92mm) swap to Jade White for the rest.
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial
Comment & Rating (12)