Romans emerging from the fog
Print Profile(3)
Description
Boost Me (for free)
If you appreciate this model and wish to enable me to create more, please send me a boost—it would be a tremendous help! I hope you enjoy it! Thank you!
The inspiration for this piece was the Battle of the Teutoburg Forest in 9 AD. The Romans (legions) emerge from the mist for battle, confident of victory, only to be taught a harsh lesson by the Germanic tribes.
I have included three print profiles: one without AMS, one with AMS, and a 200 mm x 200 mm print size with AMS.
Instructions:
Feel free to adjust the scale; however, do not modify the Z-axis.
Print with 100% infill and a layer height of 0.08 mm, using a base layer of 0.16 mm.
The model measures 150 x 150 mm.
You may print with higher layer heights below the minimum depth of 0.48 mm. The maximum depth is 2.2 mm, and the actual depth is 1.5 mm.
You only require two colors, black and white. You needn't use the specified filament manufacturers; any black and white filament will suffice, though this may naturally result in variations in brightness, gradients, and contrast.
Filaments Used:
Sunlu PLA HS (High Speed) Black
Eryone PLA White
Exchange Instructions:
Begin with black.
Switch to white at layer 8 (0.72 mm) for the remainder.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)