Fits the radio perfectly however the inclusion of a USB port hole is a bit pointless since you have to lay the radio on its side to plug in the cable. a raised base with a easy access slot to charge while upright would be ideal. 

JayArc3

0.2mm layer, 2 walls, 35% infill

Absolutely perfect for my H3. Makes a very stable portable radio on my desk. 

user_9432692

Fits great. The stand helps for the radio not to fall over pretty good. would recommend. 

Kyle

Danke. Der Zweck der Scheibe ist, dass die Nozzle vor der ersten Schicht des Stands nochmal die Möglichkeit hat restliches Filament in der Scheibe zu verdrucken. Da mein Druker gerne am Anfang bei der ersten Schicht ein wenig unsauber druckt bzw. Restfilament das an der Nozzle kleben bleibt beim Nozzle reinigen die erste Schicht beschädigt. Viele Grüße 

Thank you. The purpose of the disc is to allow the nozzle to print any remaining filament onto the disc before the first layer of the print. My printer tends to produce slightly messy first layers, or leftover filament adhering to the nozzle damages the first layer during nozzle cleaning. Kind regards

Bruzl

Good fit.
What is the purpose of the 10mm disc that is included in the print?

user_3345941998

love it. fits perfectly. I resized it a little to fit my baofeng but need to tweak it a little more. 

BillB

Quiet Relay

user_1657380128

user_3375176087

Great design, If this could be made with either slatwall,  direct wall mount   it would take advantage of the charging cable.

user_3962330195

Slayer

cover

PXL_20241122_081337985~2.jpg

PXL_20241122_081230932~2.jpg

PXL_20241122_082202125.MP~2.jpg

plate_1.png

2024-11-22_879f9e43ef32d.jpg

<ul><li>0,2mm Schichthöhe</li><li>2 Wände</li><li>Füllung 35%&nbsp;</li><li>Im Bereich der Aussparung auf der Rückseite Modifizierer hinzugefügt, Füllung 70%</li><li>Stützen werden benötigt (Baum auto)</li></ul>

<ul><li>0.2mm layer height</li><li>2 walls</li><li>35% infill&nbsp;</li><li>Modifier added in the area of the recess on the back, 70% infill</li><li>Supports are needed (tree auto)</li></ul>

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

<h2>Stand für TIDRADIO TD-H3</h2>Damit eine formschlüssige Verbindung zwischen TD-H3 und Stand entsteht, ist auf der Rückseite eine Aussparung, in die man den Clip des Funkgerätes einrasten kann. Auf der Unterseite befinden sich zwei Ausschnitte um mit USB-C laden zu können ohne das Gerät wieder aus dem Stand herausnehmen zu müssen und um die Lade-LED zu beobachten.&nbsp;&nbsp;&nbsp;<boostme><boosttitle>Boost Me</boosttitle></boostme>&nbsp;

<h2>Stand for TIDRADIO TD-H3</h2>To ensure a secure connection between the TD-H3 and the stand, a recess on the back allows the radio's clip to snap into place. Two cutouts on the underside facilitate USB-C charging without removing the device from the stand, and allow observation of the charging LED.&nbsp;&nbsp;&nbsp;<boostme><boosttitle>Boost Me</boosttitle></boostme>&nbsp;

Print Profile(1)

Description

Stand for TIDRADIO TD-H3

Comment & Rating (19)

License