Bolt-Locked Multiconnect Connector, Non-Rotating

This is a remix of BlackJackDuck's MultiConnect Non-Rotating Threaded Connector. This one uses the Multiboard bolt-lock system to secure the MultiConnect Connector Rather than the threads. This allows the rail to be oriented in any of the 8 directions. It can also be combined with a Heavy Weight-Bearing Hook Snap for a very secure connection.

For printing I used the standard MultiBoard print settings of 0.2mm layer height, 15% infill, and 3 wall loops. No supports needed.

To mount to Multiboard, you will need a Small Thread Multipoint and one of the following snaps depending on your needs: Snap, Moderate Weight Bearing Directional Snap, or Heavy Weight Bearing Hook Snap. Push the snap onto the MultiConnect Connector, secure it in place with the Small Thread Multipoint, and then just snap it onto your MultiBoard tile.

I'll be adding more Multboard, Multiconnect, and Gridfinity compatible accessories for various tools, smart home devices, networking devices, and more in the future. Be sure to follow me to keep updated with my releases. Cheers!

Credits and thanks to:
Keep Making/Jonathan for MultiBoard
David D for MultiConnect 

BlackJackDuck for the Multiconnect Non-Rotating Threaded Connector