Shakyamuni enters meditation, a serpent shelters the Buddha from the rain

After attaining enlightenment, the Buddha encountered a deep pool and entered a meditative state. A serpent emerged from the pool, shielding the Buddha from the elements for several days and nights. Upon emerging from his meditation, the Buddha imparted enlightenment to the dragon.

Dimensions: The model's default height is 90mm. Scale as needed before printing. Scaling must be adjusted within your desktop slicing software.

Supports: Pre-supported for easy removal. Layer height is 0.2mm, allowing for direct printing via the mobile app. For enhanced detail, configure a lower layer height in your desktop slicing software (select “Use Modified Value” when prompted), though print time will increase.

Filament:

The featured image utilizes Bambu PLA Silk Gold 13401 Purchase here

Feel free to leave comments or questions.

3D Printing Considerations
Based on my experience, remember these points for optimal printing:
1. Regularly clean your build plate! Ideally, wipe it with a damp cloth before each print to prevent adhesion issues.
2. Keep your filament dry. Use and promptly replace desiccant in your AMS to minimize stringing.
3. Ensure your desktop slicing software and mobile app are updated to the latest versions, and keep your printer’s firmware current.
 

For further assistance or detailed instructions, consult our customer support or refer to the official Bambu Lab Wiki:
Bambu Handy (mobile app) printing tutorial View here
Filament and accessories troubleshooting guide View here
Bambu Studio (desktop software) printing tutorial View here