Suriel with Tea - NO AMS (Multi part print)

Suriel with Tea - NO AMS (Multi part print)

This is an adaptation of the sitting ghost (scaled at around 150%) and the Suriel with tea. I modified the designs to incorporate the mug as a separate object, allowing you to print it in a different color without an AMS. By doing this, more people can enjoy the design but also reduce the waste from multi-color printing.

Disclaimer : If you are printing from the STLs or generic 3MF files, you will need to place the ‘’Mug - Negative Object'' on the lap of the suriel as the slicer wasn't able to perform the mesh boolean command.

Printing :

• Use the provided print profile as all the object are already laid out properly with working settings
• Everything is printed at 0,16mm layer height, 10% gyroid infill & outer brim
• NO SUPPORTS should be needed, although if you are struggling with bed adhesion they will help

Assembly :

• Glue is needed
• Glue the pin into the mug
• Glue the pin and mug assembly into the suriel, there should be a clear position with the negative object properly placed