Butterfly knob for hexagonal screws M4, M5, M6, M8 - Free 3D Print Model

Search models, users, collections, and posts

PYXIS

Hobby & DIY>Other Hobby & DIY

IP Report

Print Profile(2)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 4 walls, 40% infill

Designer

1 h

1 plate

4.9(81)

Each Size on Separate Plate - AMS Optional

2.1 h

4 plates

4.9(38)

Open in Bambu Studio

Boost

1441

4318

129

2.7 k

1.1 k

Released

Description

Butterfly knob for hexagonal screws M4, M5, M6 and M8

For heavier applications (larger screw size) PET-G / 0.2 material is preferred. They are very durable.

Printing can be done without supports. Any possible imperfections of the socket will be covered by the screw head.

I encourage you to experiment with colors. :-)

Boost Me (for free)

If you liked the project.... :-)

Comment & Rating (129)

@B954

Print Profile

0.2mm layer, 4 walls, 40% infill

worked great had old saw that was missing wingnut just had to resize it alittle bit but works well with petg

The profile uploader has replied

@pyxis71

Great! :-)

@Paladin_010

Boosted

Print Profile

0.2mm layer, 4 walls, 40% infill

came out very good. had to push the brim out an gave me an idea. after placing the bolt with ca glue i turned over the leftover colored brim and glue it on top. leaving it to dry proper niw and then cut it. i figure it will cover and seal the nut. just an idea 😅 Did not had photo yet after cut, its still drying up now :) printed with PETG on P1S, standard setting. raised the bed temp 5 degr, just to be sure it would hold. printed 4pcs at once..

(Edited)

@Paladin_010

Boosted

could not wait so started, bit hasty but next time i will take the time. anyway you get the idea 😅 @PYXIS maybe sink the bolt a little deeper in the design and make a sealing cap :)

(Edited)

@nivek1385

Print Profile

Each Size on Separate Plate - AMS Optional

Printed this to use with the portable screen stand I printed already and it works great.

@Ryanator

Print Profile

0.2mm layer, 4 walls, 40% infill

printed one for Ram Mount extension, it’s working flawless!

@user_556391770

Print Profile

0.2mm layer, 4 walls, 40% infill

Everything perfect, fast and very resistant printing

Show original

@user_1698476419

Print Profile

0.2mm layer, 4 walls, 40% infill

does the job.. probably need less clearance because the bolt it's loose

@user_1936160595

Print Profile

0.2mm layer, 4 walls, 40% infill

@user_2923006046

Print Profile

Each Size on Separate Plate - AMS Optional

@user_2493602741

Boosted

Print Profile

0.2mm layer, 4 walls, 40% infill

Perfect but threading is required

Show original

@user_2921404078

Boosted

Super!

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.